The file stored in 0X00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[ 0.152] boot1 version : 1.3.1a
[ 0.152] pmu type = 3
[ 0.152] bat vol = 1580
[ 0.183] axi:ahb:apb=3:2:2
[ 0.183] set dcdc2=1400, clock=1008 successed
[ 0.185] key
[ 0.197] no key found
[ 0.197] flash init start
[ 2.316] flash init finish
[ 2.319] fs init ok
[ 2.321] fattype FAT16
[ 2.321] fs mount ok
[ 2.329] script finish
[ 2.330] power finish
[ 2.338] BootMain start
[ 2.338] 0
[ 2.362] usbdc_vol = 4000, usbdc_cur = 0
[ 2.362] usbpc_vol = 4000, usbpc_cur = 0
[ 2.365] init to usb pc
[ 2.368] set pc
[ 2.455] power trigger
[ 2.456] startup status = 0
[ 2.456] power start detect
[ 2.459] power enter detect
[ 2.464] usb start detect
[ 2.465] usb enter detect
[ 2.468] USB Device!!
[ 2.868] set dc
[ 3.026] WRN:L149(OSAL/OSAL_De.c):Length is ZERO!
[ 4.527] no battery exist
[ 4.527] power exit detect
[ 4.527] usb exit detect
[ 4.530] key value = 0
[ 4.533] recovery key high 6, low 4
[ 4.536] unable to find fastboot_key key_max value
[ 4.545] test for multi os boot with display
[ 4.606] show pic finish
[ 4.606] load kernel start
[ 4.632] load kernel successed
[ 4.632] start address = 0x4a000000
[ 4.634] power exit detect
[ 4.637] usb exit d
U-Boot 2011.09-rc1-dirty (Apr 26 2012 - 20:34:36) Allwinner Technology
CPU: SUNXI Family
Board: A10-EVB
DRAM: 512 MiB
NAND: 3800 MiB
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:9-
-name- -start- -size-
bootloader : 100000 1000000
env : 1100000 200000
boot : 1300000 2000000
system : 3300000 10000000
data : 13300000 10000000
misc : 23300000 100000
recovery : 23400000 2000000
cache : 25400000 8000000
UDISK : 2d400000 c0400000
-----------------------------------
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x1300000, size 0x2000000
33554432 bytes read: OK
Starting kernel ...
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.8+ (root@raja-desktop) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #4 PREEMPT Wed Nov 28 14:42:28 IST 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun4i
[ 0.000000] Total Detected Memory: 1024MB with 2 banks
[ 0.000000] Memory Reserved(in bytes):
[ 0.000000] LCD: 0x5a000000, 0x02000000
[ 0.000000] SYS: 0x43000000, 0x00010000
[ 0.000000] G2D: 0x58000000, 0x01000000
[ 0.000000] VE : 0x44000000, 0x05000000
[ 0.000000] VE : 0x49000000, 0x01000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 245760
[ 0.000000] free_area_init_node: node 0, pgdat c0901900, node_mem_map c10ea000
[ 0.000000] Normal zone: 1280 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 146176 pages, LIFO batch:31
[ 0.000000] HighMem zone: 768 pages used for memmap
[ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
[ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=8
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 448MB 512MB = 960MB total
[ 0.000000] Memory: 831252k/831252k available, 151788k reserved, 393216K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc004a000 ( 264 kB)
[ 0.000000] .text : 0xc004a000 - 0xc08b3fe0 (8616 kB)
[ 0.000000] .data : 0xc08b4000 - 0xc090d2d8 ( 357 kB)
[ 0.000000] .bss : 0xc090d2fc - 0xc0aed9c0 (1922 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:96 nr_irqs:96 96
[ 0.000000] timer0: Periodic Mode
[ 0.000000] sw_timer_init,line:397
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] aw_clksrc_init, line:338
[ 0.000000] Console: colour dummy device 80x30
[ 0.053666] try to parse apb frequency from script faild!
[ 0.053745] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[ 0.053808] Initialize DMAC OK
[ 0.059123] bio: create slab <bio-0> at 0
[ 0.059741] SCSI subsystem initialized
[ 0.059960] usbcore: registered new interface driver usbfs
[ 0.060000] usbcore: registered new interface driver hub
[ 0.060000] usbcore: registered new device driver usb
[ 0.060000] Advanced Linux Sound Architecture Driver Version
1.0.24.
[ 0.060000] Bluetooth: Core ver 2.16
[ 21.466444] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[ 21.746923] init: waitpid returned pid 158, status = 0000000b
[ 21.752991] init: process 'surfaceflinger', pid 158 exited
[ 21.758636] init: process 'surfaceflinger' killing any children in process group
[ 21.766152] init: service 'zygote' is being killed
[ 21.779176] init: starting 'zygote'
[ 21.783562] init: waitpid returned pid 154, status = 00000009
[ 21.790130] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
[ 21.798499] init: untracked pid 154 exited
[ 21.820931] init: waitpid returned pid 163, status = 00000009
[ 21.826712] init: untracked pid 163 exited
[ 25.842043] init: starting 'surfaceflinger'
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[ 0.152] boot1 version : 1.3.1a
[ 0.152] pmu type = 3
[ 0.152] bat vol = 1580
[ 0.183] axi:ahb:apb=3:2:2
[ 0.183] set dcdc2=1400, clock=1008 successed
[ 0.185] key
[ 0.197] no key found
[ 0.197] flash init start
[ 2.316] flash init finish
[ 2.319] fs init ok
[ 2.321] fattype FAT16
[ 2.321] fs mount ok
[ 2.329] script finish
[ 2.330] power finish
[ 2.338] BootMain start
[ 2.338] 0
[ 2.362] usbdc_vol = 4000, usbdc_cur = 0
[ 2.362] usbpc_vol = 4000, usbpc_cur = 0
[ 2.365] init to usb pc
[ 2.368] set pc
[ 2.455] power trigger
[ 2.456] startup status = 0
[ 2.456] power start detect
[ 2.459] power enter detect
[ 2.464] usb start detect
[ 2.465] usb enter detect
[ 2.468] USB Device!!
[ 2.868] set dc
[ 3.026] WRN:L149(OSAL/OSAL_De.c):Length is ZERO!
[ 4.527] no battery exist
[ 4.527] power exit detect
[ 4.527] usb exit detect
[ 4.530] key value = 0
[ 4.533] recovery key high 6, low 4
[ 4.536] unable to find fastboot_key key_max value
[ 4.545] test for multi os boot with display
[ 4.606] show pic finish
[ 4.606] load kernel start
[ 4.632] load kernel successed
[ 4.632] start address = 0x4a000000
[ 4.634] power exit detect
[ 4.637] usb exit d
U-Boot 2011.09-rc1-dirty (Apr 26 2012 - 20:34:36) Allwinner Technology
CPU: SUNXI Family
Board: A10-EVB
DRAM: 512 MiB
NAND: 3800 MiB
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:9-
-name- -start- -size-
bootloader : 100000 1000000
env : 1100000 200000
boot : 1300000 2000000
system : 3300000 10000000
data : 13300000 10000000
misc : 23300000 100000
recovery : 23400000 2000000
cache : 25400000 8000000
UDISK : 2d400000 c0400000
-----------------------------------
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x1300000, size 0x2000000
33554432 bytes read: OK
Starting kernel ...
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.8+ (root@raja-desktop) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #4 PREEMPT Wed Nov 28 14:42:28 IST 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun4i
[ 0.000000] Total Detected Memory: 1024MB with 2 banks
[ 0.000000] Memory Reserved(in bytes):
[ 0.000000] LCD: 0x5a000000, 0x02000000
[ 0.000000] SYS: 0x43000000, 0x00010000
[ 0.000000] G2D: 0x58000000, 0x01000000
[ 0.000000] VE : 0x44000000, 0x05000000
[ 0.000000] VE : 0x49000000, 0x01000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 245760
[ 0.000000] free_area_init_node: node 0, pgdat c0901900, node_mem_map c10ea000
[ 0.000000] Normal zone: 1280 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 146176 pages, LIFO batch:31
[ 0.000000] HighMem zone: 768 pages used for memmap
[ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
[ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=8
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 448MB 512MB = 960MB total
[ 0.000000] Memory: 831252k/831252k available, 151788k reserved, 393216K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc004a000 ( 264 kB)
[ 0.000000] .text : 0xc004a000 - 0xc08b3fe0 (8616 kB)
[ 0.000000] .data : 0xc08b4000 - 0xc090d2d8 ( 357 kB)
[ 0.000000] .bss : 0xc090d2fc - 0xc0aed9c0 (1922 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:96 nr_irqs:96 96
[ 0.000000] timer0: Periodic Mode
[ 0.000000] sw_timer_init,line:397
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] aw_clksrc_init, line:338
[ 0.000000] Console: colour dummy device 80x30
[ 0.053666] try to parse apb frequency from script faild!
[ 0.053745] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[ 0.053808] Initialize DMAC OK
[ 0.059123] bio: create slab <bio-0> at 0
[ 0.059741] SCSI subsystem initialized
[ 0.059960] usbcore: registered new interface driver usbfs
[ 0.060000] usbcore: registered new interface driver hub
[ 0.060000] usbcore: registered new device driver usb
[ 0.060000] Advanced Linux Sound Architecture Driver Version
1.0.24.
[ 0.060000] Bluetooth: Core ver 2.16
[ 21.466444] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[ 21.746923] init: waitpid returned pid 158, status = 0000000b
[ 21.752991] init: process 'surfaceflinger', pid 158 exited
[ 21.758636] init: process 'surfaceflinger' killing any children in process group
[ 21.766152] init: service 'zygote' is being killed
[ 21.779176] init: starting 'zygote'
[ 21.783562] init: waitpid returned pid 154, status = 00000009
[ 21.790130] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
[ 21.798499] init: untracked pid 154 exited
[ 21.820931] init: waitpid returned pid 163, status = 00000009
[ 21.826712] init: untracked pid 163 exited
[ 25.842043] init: starting 'surfaceflinger'
No comments:
Post a Comment
Thank You , For Immediate Assistance Plz Put Email Copy to Deviceporting@gmail.com