Android Head Unit - Root Device / Model : evb3561sv_w_65_m0


Android Head Unit (evb3561sv_w_65_m0(full_evb3561sv_w_65_m0) or evb3561sv_w_65_m0 or TS356XKUDO

Build ID: MRA58K

CPU Info or SOC: Cortex ARM Cortex A-53 1.25 GHz ( 4 CPU or 4 Core)
Model : evb3561sv_w_65_m0(full_evb3561sv_w_65_m0)
Manufacturer : alps
Hardware : mt3561
Build ID : YT3518C_00008_V008
Android Version : 6.0
API Level : 23
Kernel Arch : aarch64
Source – Android APP CPU-Z (Google Play Store)
Cabling ( Turn On Unit without Car or Open Setup)

Inside Unit:





Panel Back Side









Top View










Rear view with USB ADB Port






Power Up Board (Cabling )

  1. Yellow ( Battery +12 V)
  2. Black ( Battery -12 V)
  3. Red (Next to Yellow – ACC [Sort red and yellow , ignition key ON])

Try without open Board Setup , connect to any USB Port and Change USB Configuration to Audio Source.
  1. Open ADB Tools And Location in CMD (Command Prompt – Admin Rights )  
  2. Check any of the Android Device (Android Phone ) connect to PC.
  3. Type Adb Devices 
  4. You can find root Shell in above image (command Adb Shell)    
  5. Download important tools to install SU (Super User) , because SU not  available in device.                                                                Install Terminal Emulator from Play Store.
Download arm64.zip and extract files to /sdcard/



          
             
Type Following Commands After Connecting to ADB Shell
1.        mount -o remount,rw /system
2.        cp /sdcard/arm64/su /system/bin/su
3.        chmod 0755 /system/bin/su
4.        cp /sdcard/arm64/su /system/xbin/su
5.        chmod 0755 /system/xbin/su
6.        su --install
7.        su --daemon&
8.        setenforce 0
9.        mount -o remount,ro /system

























Note :
1.        Chose this option after enabling Developer option in device
2.        Select USB Configuration
3.        Select Audio Source
4.        Then Check in Command Prompt (type `adb device`) 

Device Cable Specification 































  






FAQ: Tools Tips
  1. ü  The password for the hardware settings menu is 8888 (Car Setting> Factory Setting.
  2. ü  Screen calibration: Press with five fingers, then follow the signs, the next step is to configure the touch buttons.
  3. ü  Engineering menu on the phone * # * # 3646633 # * # *
  4. ü  Switch the GU to ADB mode, dial * # * # 5678 # on the phone and select the device type device


Important Links for reference:


Wires : universal iso connector
Car Stereo Wiring Harness

(Update Android head unit with three reset)